Crispy Chinese-Style Fried Chicken Wings Recipe

 



Crispy Chinese-Style Fried Chicken Wings

Step-by-Step Recipe

These crispy fried chicken wings are marinated in soy sauce, cooking wine, and black pepper, then coated with egg and starch before being deep-fried until golden and crunchy. A final sprinkle of pepper salt, chilli powder, and crushed herbs gives them an irresistible savoury flavour.

Preparation time: 40 minutes
Marinating time: 30 minutes
Cooking time: 15–20 minutes
Servings: 3–4 people

Ingredients

For the Chicken Wings

  • 1 kg chicken wings
  • 2 tablespoons light soy sauce
  • 1 tablespoon Chinese cooking wine (optional)
  • ½ teaspoon ground black pepper
  • A small pinch of salt
  • 1 large egg
  • 2 tablespoons cornstarch (cornflour)
  • Vegetable oil, for deep-frying

For the Seasoning

  • 1 teaspoon pepper salt or seasoned salt, to taste
  • ½–1 teaspoon chilli powder, to taste
  • 1 teaspoon crushed dried herbs or dried oregano
  • A pinch of extra ground black pepper, optional

Step-by-Step Cooking Instructions

Step 1: Prepare the Chicken Wings

  1. Clean the chicken wings and pat them dry with paper towels.
  2. Using a sharp knife, make two or three shallow cuts on both sides of each wing.
  3. Place the wings in a large mixing bowl.

Chef's tip: The shallow cuts help the marinade penetrate the meat, giving the wings a more flavourful result.

Step 2: Season the Chicken

  1. Add 1 tablespoon of Chinese cooking wine to the chicken.
  2. Pour in 2 tablespoons of light soy sauce.
  3. Add ½ teaspoon of ground black pepper.
  4. Sprinkle in a small pinch of salt.
  5. Using clean hands or a pair of tongs, mix everything thoroughly until all the wings are evenly coated.
  6. Cover the bowl and refrigerate for 30 minutes.

Allowing the chicken to marinate gives the meat time to absorb the savoury seasoning.

Step 3: Add the Egg

  1. After 30 minutes, remove the chicken from the refrigerator.
  2. If there is a large amount of excess marinade, drain most of it away.
  3. Crack one large egg into the bowl.
  4. Mix thoroughly until the egg coats every chicken wing.

The egg helps the starch adhere to the chicken and contributes to a crisp outer coating.

Step 4: Coat the Wings with Cornstarch

  1. Add 2 tablespoons of cornstarch to the chicken.
  2. Toss and turn the wings until the starch is evenly distributed.
  3. Check that every piece has a light coating.

If the coating is still very wet, add a little more cornstarch, approximately one tablespoon at a time.

Chef's tip: The wings should have a thin, slightly sticky coating rather than a thick, dough-like batter. This helps produce a crisp, golden exterior.

Step 5: Heat the Cooking Oil

  1. Pour enough vegetable oil into a deep, heavy-based pot or wok to submerge the chicken wings.
  2. Heat the oil to approximately 165–175°C (330–350°F).
  3. If you have a kitchen thermometer, use it to check the temperature before frying.

Avoid overheating the oil, as the coating can become dark before the chicken cooks through.

Safety tip: Never put wet chicken into hot oil, and do not overfill the pot.

Step 6: Fry the Chicken Wings

  1. Carefully lower the coated wings into the hot oil, one at a time.
  2. Fry in small batches to prevent the oil temperature from dropping too much.
  3. Cook over medium to medium-low heat, turning the wings occasionally.
  4. Continue frying until the coating becomes golden brown and crispy.

Depending on the size of the wings, frying may take approximately 8–12 minutes per batch.

Avoid overcrowding the pan because this can make the wings greasy instead of crispy.

Step 7: Check That the Chicken Is Cooked

  1. Remove a wing from the oil and allow excess oil to drain.
  2. Check the thickest part of the meat using a food thermometer.
  3. Ensure the internal temperature reaches 74°C (165°F).
  4. If the chicken is not fully cooked, continue frying until it reaches the safe temperature.

The outside should be golden and crisp, while the meat inside should be juicy and fully cooked.

Step 8: Drain the Fried Wings

  1. Remove the cooked wings from the oil using a slotted spoon or kitchen tongs.
  2. Place them on a wire rack or a plate lined with paper towels.
  3. Allow excess oil to drain for a minute.

A wire rack helps preserve the crispy coating by allowing steam to escape.

Step 9: Add the Final Seasoning

While the wings are still hot:

  1. Sprinkle pepper salt or seasoned salt over the chicken.
  2. Add chilli powder according to your preferred level of heat.
  3. Sprinkle over the crushed dried herbs or oregano.
  4. Add a little extra ground black pepper if desired.
  5. Toss the wings gently to distribute the seasoning evenly.

Taste one wing and adjust the seasoning if necessary.

Chef's tip: Add the seasoning immediately after frying so it adheres to the warm, slightly oily surface.

Step 10: Plate and Serve

  1. Arrange the crispy wings on a serving plate.
  2. Sprinkle a little extra chilli powder or dried herbs over the top.
  3. Serve immediately while the coating is at its crispiest.

Your finished chicken wings should have a crunchy golden crust, juicy meat, and a savoury, peppery flavour with a gentle chilli kick.


Five Chef's Secrets for Extra-Crispy Chicken Wings

1. Dry the chicken before marinating.
Removing excess surface moisture helps the coating adhere better.

2. Do not skip the egg.
It helps bind the cornstarch to the chicken.

3. Use cornstarch for a lighter, crispier coating.
Cornstarch is particularly useful when you want a delicate crunch rather than a thick batter.

4. Maintain the correct oil temperature.
Oil that is too cool can produce greasy wings, while oil that is too hot can burn the coating.

5. Season immediately after frying.
The warm surface helps the pepper salt, chilli powder, and herbs stick to the wings.

What to Serve with These Wings

These crispy chicken wings pair well with:

  • French fries or potato wedges
  • Fried rice
  • Coleslaw
  • Fresh cucumber salad
  • Jollof rice
  • Garlic mayonnaise or sweet chilli dipping sauce

Post a Comment

Previous Post Next Post